Printable Vinyl Heat Transfers
Tumbler Wraps/Cup Vinyl
Wait 24 hours before the first wash
Wash inside out
Machine wash warm or cold with mild detergent
Do not bleach
Do not add fabric softner
Do not iron or Dry Clean
Dry at normal setting
Applies to 100% cotton, 100% Polyester, Polyester/Cotton Blends, Leather
Set your heat press to 305 degress
Preheat garment 2-3 seconds. Position your transfer face up
Press Time : 10-15 seconds, medium pressure
Remove clear mask, Hot or Cold Peel
Set your heat press to 400 degrees each heat press is different.
Place sheets of white copy paper or parchment paper inside your shirt to prevent bleed through. Position your transfer face down (use heat tape if desired) and cover with a Teflon sheet. Press Time: 60 seconds, medium pressure
Remove transfer immediately
DTF(Direct to Film)
DTF transfers are full color heat applied transfers for light, dark, cotton or poly blend garments. Place transfer white side down, image facing up. Hot peel apply at 325 degrees F for 7-10 seconds medium pressure. Cold Peel apply at 325 degrees F for 12-15 seconds. Hot peel are transfers you peel right away. Cold peel transfers you let the material cool down before you peel.
Decals, Tumbler Wraps & Sticker Instructions
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the decal, cup wrap or sticker from adhering well.
Rub a squeegee or credit card firmly across the product through the clear transfer tape to prepare it for application. This ensures the product will cling to the transfer tape and removes any air bubbles that may have formed.
Peel the white paper backing off. If the decal, cup wrap or sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal, cup wrap or sticker off the surface. If it pulls away from the surface repeat Step 4.